A customer wanted their generator wrap. He thought it was an eye sore. A generator is a machine that converts mechanical energy into electrical energy. The not so greater looking machine we use when our electricity goes out. Most of these generator come in aluminum casting. They look like a machine.
Our customer wanted us to wrap his generator with a British flag on the top of the generator and the front the word “ Underground”. To do the processing of custom sign/generator: we took several steps: We did the flag first, we took a picture of the flag and the customer gave us the approval. We printed the picture using our 5 foot printer with colors that are from the X-Rite Color Management System. It shows the flag in high definition. After it prints, we double check the measurements. To do this, we printed the picture of the flag on special vinyl material for wraps, then we laminate it to protect the ink. We cut the special vinyl material wrap to size, to fit the top of the generator. Then, it’s applied to the generator with the mighty squeegee. It’s a process, but one that we are very knowledgeable about and take great pride in.
For the sides of the generator we used special red printed vinyl wrap and the bottom we used black special vinyl wrap. The same processing is done from above. However, to print the letters of “Underground” we used our plotter. To do the process of special vinyl lettering wrap in one color, we had to remove the excess letters, then put application tape over it. We double check the location where to install the letters and we were ready to install. To install, we used masking tape to hold letters in place, we peeled back the backing paper and then we applied the letters to the generator with the mighty squeegee.
The customer thought the generator looked great. For more information on Custom Sign/Generator Wrap , contact Unlimited Signs, Designs and Graphics at 203-546-7267. Or check out our website atwww.unltdsigns.com